How to Mainten Carbon Black Ultra fine grinding machine

Carbon black ultra fine grinding machine is professionally processing cabon black into fine and superfine carbon black powder. Ultra fine grinding machine is has the features of high efficiency, environmental protection, and energy consumption. The talc powder are widely used as new building materials and chemical products of raw materials because of rich resource and low price, getting the favor people. At present ,our ultrafine mill ;ultrafine grinding mill not only has a large number of customers at home , but also exported to dozens of countries abroad.our ultrafine mill ;ultrafine grinding mill have exported to more than 130 countries, such as USA, UAE, Ukraine, Japan, Poland, France, Brazil, Mexico, Germany, Indonesia, India, Vietnam, Philippines, Canada, South Africa, Zimbabwe, Russia, and so on. It's very important to keep maintenance the ultra fine grinding machine. Now Clirik teaches you how to make maintenance.

1. Check the bags of bag filter frequently, so as to avoid block of bags, which will decrease air flowing volume of blower and affect hte production.
2. Check every fastener frequently to ensure they are firm and reliable all the time to avoid accident.
3. Ensure all connections of air ducts are sealed tightly to avoid of leakage.
4. Prior to installation of the equipment, the preson who will be assigned to operation rules and procedures for equipment have to be technically trained to know how the principle and rules of operation. Someone should bespecifically selected and put in charge of the operation.
5. To ensure normal operation  of the equipment, a manual of safe operation rules and procedures for equioment operation ashould be wll prepared and followed. Maintenance tools, spare parts, lubricaiong oil and grease must be available for immediate use.
6.After 800 hours' running in total, the equipment should be checked and repaired. Replace the worn-and torn parts such as rollers, rings to ensure smooth operation.
7. It is benefit to lubricate each oil site according to the requirement of lubrication sustem.
8. It is a normal phenomenon that cracks might appear in the ring after it is wore off to a certain extent; you should replace it in time.
9.Remove the ash on blower impeller periodically to ensure blower running smoothly.
10.Remove the ash on muffler periodically to avoid high resistance to the air flow in the grindin glant.
11. Check bag filter preiodically, if there is broken bag, change it in time to avoid pollution.
12. The discharging valve uder the botttom of oil-water filter should discharge oil-water 2-4 times every 8 hour.
13. The drain valve on the aire tank of air comopressore should discharge oil-water once every day. If working environment is high humidity, it should discharge oil-water once every 4 hours.
14.The filter element on air cleaner is a wearing part; it needs to be changed every 150 days. It working environment is bad, the filter element changing time need to be shortened.
15.For air compressor, lubrication oil needs to be changed 100 hours after intial use, from then on once every 1000 hours. RThe interval of changing grease should be shortened if the operational environment is not good.

If you're interested in ultra fine grinding machine, please contact us.

Share this artical: